Color Mixer
Enter two colours and the share of the second one to get the blended colour as HEX and RGB, with a swatch row and five steps.
Use the tool
Loading the tool…
About Color Mixer
Mix two colours by choosing the amount of the second colour, from 0 to 100 percent. Choose how the mix is calculated: averaging the RGB numbers, as most design tools do, or mixing in linear light, which gives a brighter middle.
Worked example
Mix `#FF0000` (red) with `#0000FF` (blue) at 50 percent. Compare the two mixing methods to see how the middle colour changes.
Limits
Screens, print and paint mix colours differently. Check the result on the device or in the material where it will be used.
How to use Color Mixer
- Enter the first colour.
- Enter the second colour.
- Set the amount and read the mix.
Good to know
- Averaging RGB is what most design tools and CSS gradients do.
- Linear light mixing follows how light adds up, so the middle is brighter.
- At 0 you get the first colour exactly, and at 100 the second.
- Transparent colours are not supported.
Frequently asked questions
Which method should I use?
Use RGB averaging to match design tools. Use linear light if you want a result that behaves like mixed light.
Can I mix more than two colours?
Not here. Mix two, then mix the result with a third.