Fence Post and Panel Calculator
Enter the length of the fence, the panel width and any gates. You get the number of posts and panels.
Use the tool
Loading the tool…
About Fence Post and Panel Calculator
Estimate the number of fence posts for a run. Enter the length of the run in metres, the width of one panel from post centre to post centre, the number of gates and their width, and any corner or end posts to add.
Worked example
Enter a run 20 metres long with panels 2 metres wide and one 1-metre gate. The tool shows the number of posts.
Limits
This is an estimate. Check the layout on site, and confirm the post spacing that your panels need.
How to use Fence Post and Panel Calculator
- Enter the length of the fence run.
- Enter the width of one panel, measured from post to post.
- Enter the number of gates and their widths.
- Read the posts and panels.
Good to know
- Measure the panel width from centre to centre of the posts.
- Add a spare panel or two for breakages.
- Set posts in concrete at the depth your local rules recommend.
- Check the ground for slopes that need shorter panels.
Frequently asked questions
How many posts for a 30 metre fence?
With 2.4 m panels and no gate, a 30 metre fence needs 13 panels and 14 posts. Each gate adds two posts.
Does a gate need posts?
Yes. Each gate needs two posts.
Is the length measured inside or outside?
Measure the run along the line of the posts.